The Revmax 47RE Signature Series performance automatic transmission. These units are built to the most stringent tolerances by one expert technician from beginning to end, and each unit is signed by the technician when finished. This unit is rated at up to 1500HP (shafts will need to be upgraded, see below to add to cart) and has undergone over a year of rigorous R&D and performance testing. We don’t just say we have pride in our transmission, we literally put our name on it. This transmission features the following: This transmission contains internal parts with the ability to hold up to 1500HP. However, this will require upgrading the shafts in the transmission. Unlike our competition, we do not leave optional upgraded parts out when we build our units. We do not have stages or levels as our transmissions ALL come fully built with no available upgrades other than billet shafts. We recommend upgrading the input shaft for any customer towing or racing their truck. As for the output, we recommend this for customers who will be doing boosted launches. We only recommend upgrading the intermediate shaft for those customers who will be producing over 750HP and will be racing the majority of the time. Not only do we have the best internal parts in our units, we have spent over $150k in valve body testing equipment to provide our customers with the best tested and performing valve body that money can buy. Each valve body is custom configured to our customer’s truck and individual tested prior to being installed in the transmission. Disasembly Process and Cleaning Complete disassembly of the entire transmission, all wearable “soft parts” are discarded. Casing and housings are washed in our 190 degree hot wash tank. Hard parts are thoroughly inspected and then either discarded or hand washed Casing is thoroughly checked for any cracks or damage Standard Upgraded Internal Components Billet 300M Input Shaft Billet Stage 5 Triple Disc Torque Converter 4 Clutch Forward Drum with GPZ Clutches and Kolene Steels, Custom Machined Pressure Plate and Piston. 6/7 Clutch Direct Drum with GPZ Clutches and Kolene Steels, Custom Machined Pressure Plate and Piston. (Factory is 4 Standard Clutches and Steels) 7 Clutch Overdrive Pack with GPZ Clutches and Kolene Steels, Custom Machined Pressure Plate And Piston. (Factory is 5 Standard Clutches and Steels) 10 Clutch Overdrive Direct Pack with GPZ Clutches and Kolene Steels, Custom Machined Pressure Plate and Piston. (Factory is 9 Standard Clutches and Steels) Billet Rigid 2nd Gear / Intermediate Band Billet Anodized 2nd Gear Intermediate Servo with 7 Sealing Rings Billet Anodized Accumulator Housing with 4 Sealing Rings Billet Low / Reverse Servo Billet Direct Drum Apply Piston Billet Intermediate Band Strut Billet Band Anchor Billet Band Strut Brand New Electronics with Borg Warner Governor Solenoid Updated Brass Line Pressure Transducer New Wiring Harness Dyno Tested High-Pressure Valve Body Assembly Aluminum Deep Pan


$6625 
  • Shipping: 
  • Return Policy: All core, general and warranty returns must be approved prior to the shipment of the returning product. Please provide your order #. This will help us to process your return quickly. You will receive ALL return instructions via email within 1 - 2 business days. Core Returns: What is a Core? We want to ensure that you are refunded your core charge as soon as possible, but in order to do this, we need your help to follow these guidelines. • We require that all cores be returned within 21 days from delivery date of product requiring core charge. Failure to do so can result in forfeiture of the entire core charge return • All cores must be returned to original warehouse that original shipment was sent from. In most cases, we do not provide return shipping labels for cores, if a return label is provided in the original shipment, use this tag. If one is not included, contact us immediately, and we can provide you with the correct address of where the core(s) must be returned to. DO NOT rely on the return address on the original label as a source for where to ship to • If cores are shipped to the incorrect warehouse, your core money will be returned less the shipping cost for us to send the core(s) to the correct warehouse, or if you deferred the core you may be charged for the shipping amount • Cores that have been disassembled or have missing and/or damaged major components will not receive full core credit • Cores must be returned in the original packaging the new part was shipped in. Most manufacturers design special packaging for their products to protect them while in transit. Failure to reuse this packaging can result in damage to the core(s) which could lead to the forfeiture of your core return. Specifically regarding Bosch, they have a strict policy that core returns must be in their original packaging. If the original packaging is not used, the part number must be clearly identifiable on the part itself. If neither of these core criteria are met, no core return will be available. • Returned cores must match the same vehicle fitment as the new part purchased. For instance, if you purchase a replacement turbo for a 2007.5-2012 Dodge Ram 6.7L Cummins, the returned core must have a fitment of that same application. • We have the right to alter this policy (i.e. extend the terms) for any reason. If you have an outstanding circumstance, contact us General/New Returns • All products must be in new/uninstalled/UNOPENED condition with all the parts included • All products must be sent back in NEW and original packaging • Returns will not be accepted after 30-day from date received • Customer is 100% responsible for shipping costs (Ex: If you return an item and did not originally pay shipping costs, the original shipping cost incurred by us will be deducted from your refund) • Credit will be issued after the product is inspected and found to be in new condition • ALL returns are subject to a 5% restocking fee. Additional fees may be incurred on non-stocking items which is determined by the manufacturer • Refusal of a shipment will result in an automatic restocking fee determined upon the cost of fees associated with the refusal General/New Returns will NOT be accepted under the following conditions: • Product has been installed or attempt of install • Product has been damaged • Product is shipped without the original packaging, manuals and/or parts • Product Packaging has been opened and or seal has been broke on the product • Custom tuners & tune packs such as, EFI Live, EZ LYNK, HP-Tuners, Hydra tuner are not available for return Product Warranties • Moore’s Diesel Performance honors all manufacturer warranties • Any product that carries a manufacturer's warranty must be warrantied through its respective manufacturer • Installed components which have failed, such as, turbo, injectors, injection pumps, etc., must be removed/shipped back to its manufacturer for inspection before replacement • Moore’s Diesel Performance is not responsible for shipping products to manufacturers for inspection or the return shipping to the end user • Labor time is not paid by Moore’s Diesel Performance • Manufacturers will only pay labor if stated in the manufacturer’s warranty • All products manufactured by Moore’s Diesel Performance carry a one year manufacturer defect warranty

THIS ITEM REQUIRES A CORE EXCHANGE. PLEASE SELECT : *


Learn More